[libre-riscv-dev] [Bug 155] a PLL is needed for the SoC
bugzilla-daemon at libre-soc.org
bugzilla-daemon at libre-soc.org
Tue May 26 21:12:45 BST 2020
https://bugs.libre-soc.org/show_bug.cgi?id=155
--- Comment #15 from Staf Verhaegen <staf at fibraservi.eu> ---
> Input: 24 MHz XTAL
AFAIK there is no crystal oscillator IP available for this project so I assumed
the input clock would be CMOS.
> So, regarding the specifications, the most important point determining the
> overall architecture is :
> -- Jitter
For a digital circuit jitter of the clock eats in the timing budget, the
critical has to be fast enough to have result for the smallest clock cycle due
to jitter.
Analog/mixed-signal blocks will have their requirement on jitter, like
resolution/bandwidth for an ADC or error rate for SERDES.
--
You are receiving this mail because:
You are on the CC list for the bug.
More information about the libre-riscv-dev
mailing list