[libre-riscv-dev] Routing a first nmigen disign with Corilis

Tobias Platen tobias8202 at platen-software.de
Sat Feb 8 17:44:39 GMT 2020

I have read the documentaion of corilis2, and now I want to route a first simple design.
Yosys and the blif format have been mentioned, so I guess exporting verilog from nmigen,
then running yosys to convert the verilog to blif. Then read the netlist into corilis2,
map to cells from the target technology. Then place and route can be done with Mauka, Knik and Kite. 

Tobias Platen <tobias8202 at platen-software.de>

More information about the libre-riscv-dev mailing list