[libre-riscv-dev] conversation with michiel from nlnet

Jacob Lifshay programmerjake at gmail.com
Mon Sep 16 09:52:03 BST 2019

On Mon, Sep 16, 2019 at 1:23 AM Luke Kenneth Casson Leighton
<lkcl at lkcl.net> wrote:
> i just had an "update" conversation with michiel from NLNet, to
> discuss progress and ideas.  he said that he would be more than happy
> to look at some extra proposals:

nice! getting the impression that we're not the only ones that think
this project is more than a pipe dream.

> * a *new* proposal for turning the amdgpu vulkan driver code into a
> Libre RISC-V one.  this in *addition* to the existing Kazan Project.
> * a collaboration (which is under discussion) with lip6.fr, to be
> started (roughly) after their current 350nm mini-RISCV ASIC, to help
> us to do the layout in coriolis2.
> * *another* collaboration with staf on a project called chips4makers -
>  https://www.chips4makers.io/blog - where he will do improvements to
> NSXLIB and OpenRAM to make them suitable for scaling from 180nm right
> the way to 28nm, and to do GPIO pads as well.  this is the "level
> below" lip6.fr.
> basically they really want to support us and see this project succeed,
> which is really nice.
> l.
> _______________________________________________
> libre-riscv-dev mailing list
> libre-riscv-dev at lists.libre-riscv.org
> http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

More information about the libre-riscv-dev mailing list