[Libre-soc-bugs] [Bug 517] Define JTAG pins and set up with litex for ulx3s85f

[bugzilla-daemon at libre-soc.org]

https://bugs.libre-soc.org/show_bug.cgi?id=517

--- Comment #63 from Luke Kenneth Casson Leighton <lkcl at lkcl.net> ---
Wire the RED jumper cable to (ULX3S pin #2) then wire it to (STLINKv2 pin #2),
this will serve as the Voltage Reference signal (VREF)

i mean, "select a red male-to-female jumper cable and wire it to ULXS."

separate table

"select a red male-tomale cable amd wire it to STLINKv2"

-- 
You are receiving this mail because:
You are on the CC list for the bug.