[libre-riscv-dev] [Bug 358] new MCU-ALU test picked up RC / OE / CR handling issue

[bugzilla-daemon at libre-soc.org]

https://bugs.libre-soc.org/show_bug.cgi?id=358

--- Comment #2 from Luke Kenneth Casson Leighton <lkcl at lkcl.net> ---
ah.  just as in the unit tests which check if OP_CMP* is enabled, this was
missing in CommonOutputStage.

however this highlights something else: the destination for CR output needs to
be implicitly set to CR0 when RC is enabled, otherwise the output stage has ni
idea where to put the result.

-- 
You are receiving this mail because:
You are on the CC list for the bug.