[libre-riscv-dev] Routing a first nmigen disign with Corilis

[Luke Kenneth Casson Leighton]

looks good.  i want a chip like that!

"It's practical limit..."

this means "it is practical limit..."

you mean "its practical"  "its" being the relative pronoun, rather
than the short-hand for the two words "it is"

---
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68

On Sat, Feb 15, 2020 at 12:36 PM Jean-Paul Chaput
<Jean-Paul.Chaput at lip6.fr> wrote:
>
>
> Hello Luke,
>
>
> It seems I forgot to send this mail earlier...
>
> I did put online a first version of "coriolis.lip6.fr".
> It is accessible through "http://coriolis.lip6.fr", the https will issue
> a warning about the certificate, as it is a VHOST over "www-soc.lip6.fr".
> This is temporary, and not any kind of piracy attempt !
>
> It's goal is to regroup all documentation about Alliance/Coriolis
> and the whole ASIC design flow (how to use alliance-check-toolkit,
> integration of third party software like Yosys, GHDL, nMigen, ...)
> This is a work in progress and is based on the Coriolis doc, but
> with more contents.
>
> Of coures all suggestions are welcome.
>
>
> Best regards,
>
>
> On Tue, 2020-02-11 at 20:20 +0000, Luke Kenneth Casson Leighton wrote:
> > On Tue, Feb 11, 2020 at 7:00 PM Jean-Paul Chaput
> > <Jean-Paul.Chaput at lip6.fr> wrote:
> >
> > >   You may also toy with Controller -> Look, try the other ones.
> > >   If you want a new one, to mimic something you're better
> > >   familiar with, it's in configurations files all written
> > >   in Python so easy to do, if a little tedious.
> >
> > okaay, great.
> >
> > something for later.
> >
> > what i may do is write an alternative mouse-control.  there's a way
> > that's done which is "intuitive" - the cursor jumps to screen-centre
> > the moment you start to zoom, and that feels really natural because
> > where you move the mouse, "obviously" that's where you want to start
> > zooming.
> >
> > l.
> >
> > _______________________________________________
> > libre-riscv-dev mailing list
> > libre-riscv-dev at lists.libre-riscv.org
> > http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
> --
>
>       .-.     J e a n - P a u l   C h a p u t  /  Administrateur Systeme
>       /v\     Jean-Paul.Chaput at lip6.fr
>     /(___)\   work: (33) 01.44.27.53.99
>      ^^ ^^    cell:      06.66.25.35.55   home: 09.65.29.83.38
>
>     U P M C   Universite Pierre & Marie Curie
>     L I P 6   Laboratoire d'Informatique de Paris VI
>     S o C     System On Chip
> _______________________________________________
> libre-riscv-dev mailing list
> libre-riscv-dev at lists.libre-riscv.org
> http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev