[Libre-soc-bugs] [Bug 526] create dry-run 180nm GDS-II files for IMEC

bugzilla-daemon at libre-soc.org bugzilla-daemon at libre-soc.org
Wed Nov 25 21:25:03 GMT 2020


https://bugs.libre-soc.org/show_bug.cgi?id=526

--- Comment #51 from Jean-Paul.Chaput at lip6.fr ---
(In reply to Luke Kenneth Casson Leighton from comment #49)
> JP just re-ran that ./build_full.sh (bear in mind the POWERISA core is still
> not included in that, it is just litex peripherals) and it is still
> successful.
> one route is not successful however i just noticed that this exact same
> unsuccessful unrouted track is one that had 2 "repair events" on it.

  I'm now ready to attack that part. DRC is OK, I am looking into JSON.

  Don't give too much importance to the final results, I am using Staf
  FlexLib which has 17 METAL2 tracks instead of 10 for the nsxlib
  version. So I expect to route with much less problems...
    What matters here is that the flow by itself works (reading the
  netlist and the positions of the I/O pads).

  Best regards,

-- 
You are receiving this mail because:
You are on the CC list for the bug.


More information about the libre-soc-bugs mailing list