[Libre-soc-bugs] [Bug 517] Define JTAG pins and set up with litex for ulx3s85f

bugzilla-daemon at libre-soc.org bugzilla-daemon at libre-soc.org
Wed Nov 4 18:23:58 GMT 2020


https://bugs.libre-soc.org/show_bug.cgi?id=517

--- Comment #54 from Luke Kenneth Casson Leighton <lkcl at lkcl.net> ---
(In reply to Cole Poirier from comment #53)
> (In reply to Luke Kenneth Casson Leighton from comment #50)
> >
> > utterly confusing. put explicitly "note the tab" and actually mark it using
> > gimp with an arrow pointing to the tab.
> > 
> > also action instructions in comment #47.
> 
> Ok. So do that with the upside image that has the same orientation as the
> JTAG pinout and get rid of the right-side-up image?

i thought about that, after going "argh", and it's probably useful to have
both.

> Working on the instructions in #47, didn't want to remove the instructions
> until I have finished adding the checklist that will replace it.

there is a duplicated exact copy of those same instructions in comment #0. 
remove it, replace it with a "TODO reminder" and a link to comment #0.  that
way you will know to conveniently click on that link when it comes to adding
the checklist, yes?

> orientation of fig 10 but coloured?... actually that will require a new
> photo won't it as the tab is not visible in the current photo of the
> STLINKV2 with the same orientation as fig 10.

a pink/purple arrow pointing to the same place people will get the message.

-- 
You are receiving this mail because:
You are on the CC list for the bug.


More information about the libre-soc-bugs mailing list